| Non-Asbestos Gasket Materials Compressed Aramid Fiber Sheet |
 This material is a non-asbestos sheet material formulated for services in most static sealing applications as a universal replacement gasket.NA-1001 is manufactured through the hot calendar process under rigorous quality control standards.Its content is aramid fiber bound by nitrile rubber.
This material is suitable against water, brine, steam, organic and weak inorganic acids, concentrated and diluted alkalis, chemicals, petroleum and petroleum derivatives, synthetic oils, animal fats, vegetable oils, aromatic, aliphatic and chlorinated solvents and refrigerants. |
| SERVICE LIMITS | | | Type | Description | Limits | | Temperature Limits | Maximum | -40 * F | | Maximum | 720 * F | | Continuous Service | 460 * F | | Pressure | Maximum | 1595 psi (110 bar ) | | Continuous Service | 725 ( 50 bar ) | | Color | Green, White, Blue | |
|
|
| Typical Physical Properties | | | ASTM Test Method | Property | Value | | ASTMF36 A | density g/cm3 | 1.83 | | ASTM F -495 | % Ignition Loss @ 1472 * F | 29 | | ASTM F -152 | Tensile strength across grain psi | 1900 | | ASTM F-36A | % Compressibility @ 5000 psi | 9 | | ASTM F 36A | % Recovery minimum | 55 | | ASTM F37-A | Sealability (ml /hr. leakage) @ 2000 psi | 0.6 | | ASTM F-38 | creep relaxation @ 212 * F | 31 | | | | | *This data is a general guide for selection of materials and does not constitute specification limits.It should not be used as the sole means of specifying a material for an application.Your specific application should not be undertaken without independent study and evaluation for suitability.For specific application recommendations consult with Blaylock Gasket & Packing.Failure to select proper sealing products could result in property damage and/or serious personal injury.Specifications subject to change without notice. |
|
|
| Premium Compressed Aramid Fiber SheetNitrile Binder |
 This sheet has numerous applications in the process industries like: mild acids and alkalis, water, hydrocarbon, oils, gasoline, steam, air, industrial gases, general chemicals and neutral solutions.Style NA-1081 is a compressed non-asbestos sheet gasket material produced from a combination of Aramid fiber, inorganic fillers and bonded with a Nitrile rubber. |
 |
This sheet has numerous applications in the process industries handling media like: mild acids and alkalis, water, brine, saturated steam, air, industrial gases, general chemicals and neutral solutions.Style NA-1080 is a compressed non-asbestos sheet gasket material produced from a combination of Aramid fiber, Inorganic Fillers and bonded with a Styrene-Butadiene Rubber (SBR).
This sheet has numerous applications in the process industries handling media like: mild acids and alkalis, water, brine, saturated steam, air, industrial gases, general chemicals and neutral solutions.Style NA-1080 is a compressed non-asbestos sheet gasket material produced from a combination of Aramid fiber, Inorganic Fillers and bonded with a Styrene-Butadiene Rubber (SBR) |
|
| SERVICE LIMITS | | | Type | Description | Value | | Temperature Limits | Maximum | -40*F | | Maximum | 750*F | | Continuous Service | 500*F | | Pressure | Maximum | 1595 psi ( 110 bar ) | | Continuous Service | 725 psi (50 bar) | | Color | Blue | |
|
|
| Typical Physical Properties | | | ASTM Test Method | Property | Value | | ASTMF36 A | density g/cm3 | 2.0 | | ASTM F -495 | % Ignition Loss @ 1472 * F | 23 | | ASTM F -152 | Tensile strength across grain psi | 1915 | | ASTM F-36A | % Compressibility @ 5000 psi | 8 | | ASTM F 36A | % Recovery minimum | 59 | | ASTM F37-A | Sealability (ml /hr. leakage) @ 2000 psi | 0.5 | | ASTM F-38 | creep relaxation @ 212 * F | 20 | | | | | *This data is a general guide for selection of materials and does not constitute specification limits.It should not be used as the sole means of specifying a material for an application.Your specific application should not be undertaken without independent study and evaluation for suitability.For specific application recommendations consult with Blaylock Gasket & Packing.Failure to select proper sealing products could result in property damage and/or serious personal injury.Specifications subject to change without notice. |
|
|
| Compressed Aramid Fiber Sheet SBR Binder |
 This sheet has numerous applications in the process industries handling media like: mild acids and alkalis, water, brine, saturated steam, air, industrial gases, general chemicals and neutral solutions.Style NA-1080 is a compressed non-asbestos sheet gasket material produced from a combination of Aramid fiber, Inorganic Fillers and bonded with a Styrene-Butadiene Rubber (SBR). |
 |
| SERVICE LIMITS | | | Type | Description | Value | | Temperature Limits | Maximum | -40*F | | Maximum | 720*F | | Continuous Service | 520*F | | Pressure | Maximum | 1015 psi ( 110 bar ) | | Continuous Service | 725 psi (50 bar) | | Color | Off White | |
|
|
| Typical Physical Properties | | | ASTM Test Method | Property | Value | | ASTMF36 A | density g/cm3 | 1094 | | ASTM F -495 | % Ignition Loss @ 1472 * F | 26 | | ASTM F -152 | Tensile strength across grain psi | 1990 | | ASTM F-36A | % Compressibility @ 5000 psi | 10 | | ASTM F 36A | % Recovery minimum | 58 | | ASTM F37-A | Sealability (ml /hr. leakage) @ 2000 psi | 0.5 | | ASTM F-38 | creep relaxation @ 212 * F | 20 | | | | | *This data is a general guide for selection of materials and does not constitute specification limits.It should not be used as the sole means of specifying a material for an application.Your specific application should not be undertaken without independent study and evaluation for suitability.For specific application recommendations consult with Blaylock Gasket & Packing.Failure to select proper sealing products could result in property damage and/or serious personal injury.Specifications subject to change without notice. |
|
|
Compressed Carbon Fiber Sheet Nitrile Binder |
This sheet is manufactured from carbon fibers and graphite, bonded with Nitrile rubber.NA-1100 is used for applications to near 900° F.
This sheet enables plants to use only one gasket material and avoid the confusion of needing several different sheets or gasket styles in the plant.This sheet cuts very clean and easily.NA-1100 is suitable for sealing hot oils, fuels, coolants, solvents, gases, water and steam. |
 |
| SERVICE LIMITS | | | Type | Description | Value | | Temperature Limits | Maximum | -40*F | | Maximum | 840*F | | Continuous Service | 520*F | | Pressure | Maximum | 1900 psi ( 110 bar ) | | Continuous Service | 725 psi (50 bar) | | Color | Black | |
|
|
| Typical Physical Properties | | | ASTM Test Method | Property | Value | | ASTMF36 A | density g/cm3 | 1.7 | | ASTM F -495 | % Ignition Loss @ 1472 * F | 38 | | ASTM F -152 | Tensile strength across grain psi | 1900 | | ASTM F-36A | % Compressibility @ 5000 psi | 15 | | ASTM F 36A | % Recovery minimum | 56 | | ASTM F37-A | Sealability (ml /hr. leakage) @ 2000 psi | 0.5 | | ASTM F-38 | creep relaxation @ 212 * F | 23 | | | | | *This data is a general guide for selection of materials and does not constitute specification limits.It should not be used as the sole means of specifying a material for an application.Your specific application should not be undertaken without independent study and evaluation for suitability.For specific application recommendations consult with Blaylock Gasket & Packing.Failure to select proper sealing products could result in property damage and/or serious personal injury.Specifications subject to change without notice. |
|
CONSTRUCTION
Style NA1085 is a compressed non-asbestos sheet gasket material produced from aramid fibers and bonded with Hypalon® rubber. It is manufactured through the hot calendar process under rigorous quality control standards that are registered under ISO-9001 certification. APPLICATION / SERVICE
Style NA1085 is a severe service non-asbestos sheet that is specifically formulated to provide an effective seal against most acids in the process industries. This style is suitable for service handling the following general media categories:
| · Mild inorganic acids | · Water | · Oxygenated Solvents |
| · Mild organic acids | · Brine | · Neutral solutions |
| · Strong inorganic acids | · Saturated Steam | · Refrigerants |
| · Strong organic acids | · Air | · General chemicals |
| · Concentrated alkalis | · Industrial gases | · Diluted alkalis |
|
|
| SERVICE LIMITS | | | Type | Description | Value | | Temperature Limits | Maximum | 464*F | | Continuous Maximum | 362*F | | Pressure Limits | Maximum | 1015 psi ( 70 bar ) | | Continuous Max | 725 psi (50 bar) | | ASTM Line Call OUt F104 | F712000E00M5 | | | Color | Cobalt Blue | | | Available Sheet Sizes | Thickness | 1/64", 1/32",1/16",3/32", 1/8" | | Sheet Sizes | 59" x 63" | | | 59" x 126" |
|
|
TYPICAL PHYSICAL PROPERTIES | ASTM Test Method | Property | Value | - | Density | 106 lb/ft3 (1.7 gm/cc) | F36 | Compressibility | 5-15% | F36 | Recovery | min 40% | F152 | Tensile Strength | 2030 psi (14 N/mm2) | F495 | Ignition Loss | max 37% | F146 | Thickness Increase After 5 Hour Immersion | | | ·ASTM IRM 903 @300°F (150°C) | | | ·ASTM Fuel B @77°F (25°C) | | 25% H2SO4 | max 6 | 25% HCI | max 5 | 25% HNO3 | max 6 | F146 | Weight Increase After 5 Hour Immersion | | | ·ASTM IRM 903 @300°F (150°C) | | | ·ASTM Fuel B @77°F (25°C) | | 25% H2SO4 | max 6 | 25% HCI | max 5 | 25% HNO3 | max 6 | F38 | Creep relaxation | 26% | | Torque Retention (DIN 52913) | 28 N/mm2 | F37 | Sealability at 1000 psi | 0.2 ml/h |
|
|
PHYSICAL PROPERTIES AFTER ACID IMMERSIONS ~ 5 HOURS AT 73°F | Physical Properties | 25% Sulfuric | 25% Nitric | 25% Hydrochloric | Thickness Increase | 30% | 7% | 5% | Weight Increase | 20% | 8% | 5% |
|
|
| Pressure x Temp |
 |
| The P x T graph shown above indicates the service limits for this sheet considering pressure and temperature simultaneously... (Tests were performed with nitrogen on 1.6mm thick sheet). The "normal" curve represents the common usage area for this sheet while the "maximum" curve indicates the maximum limits. For applications near or above the "maximum" curve, contact Blaylock Gasket & Packing. |
Gaskets